Fixed windmills, oriented to the prevailing wind were, for example, extensively used in the Cyclades islands of Greece. The economies of power and transport allowed the use of these 'offshore' mills for grinding grain transported from the mainland and flour returned. A 1/10th share of the flour was paid to the miller in return for his service. This type would mount triangular sails when in operation.
In North Western Europe, the horizontal-shaft or vertical windmill (so called due to the dimension of the movement of its blades) dates from the last quarter of the 12th century in the triangle of northern France, eastern England and Flanders. These earliest mills were used to grind cereals. The evidence at present is that the earliest type was the post mill, so named because of the large upright post on which the mill's main structure (the "body" or "buck") is balanced. By mounting the body this way, the mill is able to rotate to face the (variable) wind direction; an essential requirement for windmills to operate economically in North-Western Europe, where wind directions are various. By the end of the thirteenth century the masonry tower mill, on which only the timber cap rotated rather than the whole body of the mill, had been introduced. Due to the fact that only the cap of the tower mill needed to be turned the main structure could be made much taller, allowing the blades to be made longer, which enabled them to provide useful work even in low winds. Windmills were often built atop castle towers or city walls, and were a unique part of a number of fortifications in New France, such as at Fort Senneville.
The familiar lattice style of windmill blades allowed the miller to attach cloth sails to the blades (while applying a brake). Trimming the sails allowed the windmill to turn at near the optimal speed in a large range of wind velocities.
Upminster (Essex, UK) Windmill in June 2006; a smock mill - before it lost one of its sails in an early 2007 storm.The fantail, a small windmill mounted at right angles to the main sails which automatically turns the heavy cap and main sails into the wind, was invented in England in 1745. The smock mill is a later variation of the tower mill, constructed of timber and originally developed in the sixteenth century for land drainage. With some subsequent development mills became versatile in windy regions for all kind of industry, most notably grain grinding mills, sawmills (late 16th century), threshing, and, by applying scoop wheels, Archimedes' screws, and piston pumps, pumping water either for land drainage or for water supply.
With the industrial revolution, the importance of windmills as primary industrial energy source was replaced by steam and internal combustion engines. Polder mills were replaced by steam, or diesel engines. The industrial revolution and increased use of Steam and later Diesel power however had a lesser effect on the Mills of the Norfolk Broads in the United Kingdom, these being so isolated (on extensive uninhabitable marshland), therefore some of these mills continued use as drainage pumps till as late as 1959. More recently historic windmills have been preserved for their historic value, in some cases as static exhibits when the antique machinery is too fragile to put in motion, and in other cases as fully working mills.
With increasing environmental concern, and approaching limits to fossil fuel consumption, wind power has regained interest as a renewable energy source. This new generation of wind mills produce electric power and are more generally referred to as wind turbines.
See Flood control in the Netherlands for use of windmills in land reclamation in the Netherlands.
没有评论:
发表评论